Screw-clamp terminals, 1 x 1.5 mm² or 1 x 0.75 mm² with adaptor
Wiring technique
5-wire
Detection system
Reflex
Emission
Infrared reflex
Cable entry
1 entry for M16 x 1.5 cable gland, cable outer diameter: 7-10 mm
Discrete output function
1 C/O
[Us] rated supply voltage
24...240 V AC/DC
Type of output signal
Discrete
Supply circuit type
AC/DC
Switching frequency
20 Hz
Delay response
25 MILLISECOND
Setting-up
Without sensitivity adjustment
Current consumption
<= 35 mA no-load
Output type
Relay
Switching capacity in mA
3 A (cos φ = 1 for 0.5 million cycles at 1 operating cycle per second at 250 V)
Lens material
PMMA
Status LED
1 LED (yellow) for output state, 1 LED (green) for supply
Sensing range
> 5...15 m
Maximum voltage drop
<1.5 V (closed state)
Delay first up
60 MILLISECOND
Delay recovery
25 MILLISECOND
Maximum power consumption in W
-
Shock resistance
30 gn (duration = 11 ms) conforming to IEC 60068-2-27
IP degree of protection
IP67 double insulation conforming to IEC 60529, IP65 double insulation conforming to IEC 60529
Vibration resistance
7 gn, amplitude = +/- 1.5 mm (f = 10-55 Hz) conforming to IEC 60068-2-6
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov