9013FSG2J20M4C20
Pressure switch, 9013FS, pressure range 20 to 40 psi, adjustable differential, for water pump
END OF COMMERCIALISATION
Expand all
Datasheet
Range of product
Pumptrol
Pressure sensor type
Electromechanical pressure switch
Product or component type
Electromechanical pressure switch
Pressure sensor name
9013FS
Product specific application
Control electrically driven water pumps
ETIM classification
ETIM 9 - EC000243 - Pressure switch
Material
Polypropylene: cover, noryl thermoplastic resin or equivalent: cover
Pressure switch type of operation
Regulation between 2 thresholds
Operating position
Any position
Pressure sensor size
65 psi (5-45 psi)
Destruction pressure
220 PSI
Pressure actuator
Diaphragm
Controlled fluid
Fresh water (32-158 °F)
Fluid connection type
0.25 inch NPSF internal conforming to UL 508
Local display
Without
Value of setting
20...40 psi
Scale type
Adjustable differential
Factory modification
Low pressure cut-off (AUTO-START-OFF) operates roughly 10 PSIG below cut-in
Setting
Internal
Product certifications
CSA
UL listed
UL listed
Standards
CE
NSF ANSI 61 Annex G
UL 508
NSF ANSI 61 Annex G
UL 508
Quantity per set
Set of 20
Type of packing
Group
Mechanical durability
300000 cycles
Cable entry number
2 0.88 in cable entries with 0.84 in across flats conforming to UL 508
Repeat accuracy
+/- 3 %
Electrical durability
100000 cycles, operating rate <10 cyc/mn
Electrical connection
Screw-clamp terminals, clamping capacity: 10 AWG, screw-clamp terminals, clamping capacity: 5.261 mm²
Electrical circuit type
Power circuit
Contacts type and composition
2 NC, snap action, DPST-DB, Form YY
Terminals description ISO n°1
L1-T1
L2-T2
L2-T2
Operating rate
10 c.p.m
[Ui] rated insulation voltage
575 V conforming to UL 508
Materials in contact with fluid
Zinc plated steel or equivalent flange, nitrile (Buna-N) or equivalent rubber diaphragm
Short-circuit protection
20 A cartridge fuse, type gG
Motor power kW
1.5 kW (2 hp) at 230 V AC, 1 phase, 1.1 kW (1.5 hp) at 115 V AC, 1 phase, 1.5 kW (2 hp) at 115 V AC, 3 phases, 2.2 kW (3 hp) at 230 V AC, 3 phases, 0.75 kW (1 hp) at 460 V AC, 3 phases, 0.75 kW (1 hp) at 575 V AC, 3 phases, 0.18 kW (0.25 hp) at 115 V DC, 0.18 kW (0.25 hp) at 230 V DC
Terminal block type
4 terminals
Height
2.8 in
Width
3.1 in
Depth
3.76 in
Product weight
20 livre
IP degree of protection
IP20 conforming to IEC 60529
NEMA degree of protection
NEMA 1 conforming to UL 50
Ambient air temperature for operation
-22…158 °F
Ambient air temperature for storage
-22…158 °F
Protective treatment
None
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Country of origin
MX (Mexico)
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
25.806 cm
Package 1 width
10.16 cm
Package 1 length
65.548 cm
Package 1 weight
453.592 g
Back to top
