9016GVG1J99
Electromechanical vacuum switch, 9016GVG, adjustable scale, 2 thresholds, 25 inHg factory setting
Commercialized
Expand all
Datasheet
Range of produc
9016GVG
Product or component type
Electromechanical vacuum switch
Device application
Power circuit application
Device short name
9016GVG
Electrical circuit type
Power circuit
Factory modification
-
Vacuum switch type of operation
Regulation between two thresholds
Scale type
Adjustable
Vacuum sensor size
25 inHg
Cut out range
5…25 inHg
Cut-in range
0…20 inHg
Approx adjustable differential at mid range
5…10 inHg
Value of setting
Specify factory setting
Maximum pressure
100 psi
Maximum permissible pressure - per cycle
689.48 kPa
Local display
Without
Fluid connection type
0.25 inch 18 NPSF conforming to UL 508
Electrical connection
Screw-clamp terminals AWG 22...AWG 12
Cable entry number
3 knock-outs for 1/2" NPT conduit
Terminal block type
8 screw terminals
Pressure actuator
Diaphragm nitrile (Buna-N)
Controlled fluid
Air (-40…121 °C)
Water (-40…121 °C)
Hydraulic oil (-40…121 °C)
Gas (-40…121 °C)
Water (-40…121 °C)
Hydraulic oil (-40…121 °C)
Gas (-40…121 °C)
Materials in contact with fluid
Zinc plated steel
Nitrile (Buna-N)
3M Scotch-Grip 847 rubber and gasket adhesive
Nitrile (Buna-N)
3M Scotch-Grip 847 rubber and gasket adhesive
Cover material
Polypropylene, noryl thermoplastic resin or equivalent
Operating position
Any position
Enclosure material
Stamped metal
Maximum operating rate
100 cyc/mn
Repeat accuracy
2.5 %
Motor power kW
1.5 kW (2 hp) at 115 V AC, 1 phase
2.2 kW (3 hp) at 115 V AC, 3 phases
2.2 kW (3 hp) at 230 V AC, 1 phase
3.75 kW (5 hp) at 230 V AC, 3 phases
3.7 kW (5 hp) at 460 V AC, 1 phase
3.7 kW (5 hp) at 460 V AC, 3 phases
3.7 kW (5 hp) at 575 V AC, 1 phase
3.7 kW (5 hp) at 575 V AC, 3 phases
0.75 kW (1 hp) at 115 V DC, 3 phases
0.75 kW (1 hp) at 230 V DC
2.2 kW (3 hp) at 115 V AC, 3 phases
2.2 kW (3 hp) at 230 V AC, 1 phase
3.75 kW (5 hp) at 230 V AC, 3 phases
3.7 kW (5 hp) at 460 V AC, 1 phase
3.7 kW (5 hp) at 460 V AC, 3 phases
3.7 kW (5 hp) at 575 V AC, 1 phase
3.7 kW (5 hp) at 575 V AC, 3 phases
0.75 kW (1 hp) at 115 V DC, 3 phases
0.75 kW (1 hp) at 230 V DC
Contacts type and composition
2 NC, DPST-DB, Form YY, snap action, silver cadmium contacts
Short-circuit protection
20 A cartridge fuse, type gG
Mechanical durability
300 cycles
Setting
Internal
Net weight
2.09 kg
Height
181.10 mm
Depth
111.00 mm
Width
116.33 mm
Standards
UL 508
Product certifications
CSA
UL listed
UL listed
Protective treatment
None
Ambient air temperature for operation
-23…85 °C
Ambient air temperature for storage
-23…85 °C
NEMA degree of protection
NEMA 1 conforming to UL 698
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
31.484 cm
Package 1 Width
12.395 cm
Package 1 Length
79.969 cm
Package 1 Weight
2.087 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Environmental Disclosure
Circularity Profile
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Documents & Downloads
Document name
Date
Size
Document name
Date
Size
Document name
Date
Size
11/23/2023
182.8 kB
Document name
Date
Size
11/23/2023
195.3 kB
11/23/2023
195.3 kB
Document name
Date
Size
11/23/2023
297.3 kB
Expand all
Related products & accessoires
9016GAW1Z16
Electromechanical vacuum switch, 9016G, 9016 g, adjustable scale, 2 thresholds, Set 0 to 28.7 InHg
9016GVG1J09
Electromechanical vacuum switch, 9016GVG, adjustable scale, 2 thresholds, Set 3 to 8 InHg
9016GVG1J13
Electromechanical vacuum switch, 9016GVG, adjustable scale, 2 thresholds, Set 20 to 25 InHg
9016GVG1J13E
Electromechanical vacuum switch, 9016GVG, adjustable scale, 2 thresholds, Set 20 to 25 InHg
Back to top
