Datasheet
Technical Drawings
M12 Connectors, 5-pin
M12 Connectors, 5-pin
Wiring Diagram: Series Connection
Cat. 4 / PL=e (EN/ISO 13849-1) / SIL3 (IEC 61508) / SILCL3 IEC 62061), if combined with an appropriate Preventa XPS Safety module PL=e / SIL3
NOTE: KM1 and KM2 contactors must have force-guided contacts.
Face to Face Mounting (Preferred Configuration)
Side by Side Mounting
Correct Mounting Configuration
Minimum Mounting Clearances between Safety Switches
E1 min. | E2 min. | E3 min. |
---|---|---|
45 | 150 | 65 |
E1 min. | E2 min. | E3 min. |
---|---|---|
1.77 | 5.91 | 2.56 |
Face to Face Mounting (Preferred Configuration)
Sao and Sar sensing distances along Y axis as function of Z (longitudinal misalignment for X=0)
Sao and Sar sensing distances along X axis as function of Z (transverse misalignment for Y=0)
Side by Side Mounting
Sao and Sar sensing distances along Y axis as function of X (longitudinal misalignment for Z=0mm)
Sao and Sar sensing distances along Z axis as function of X (transverse misalignment for Y=0mm)
Documents & Downloads
7/24/2024
6.8 MB
7/6/2024
7.4 MB
11/22/2023
8.9 MB
11/23/2023
12.4 MB
11/29/2023
23.6 MB
11/29/2023
195.3 kB
11/23/2023
3.0 MB
11/23/2023
8.8 MB
Related products & accessoires
M12 plug for XCSRC Daisy Chain models, Telemecanique Safety switches XCS, Loopback device
Telemecanique Safety switches XCS, diagnostic module for XCSRC Daisy Chain models, Modbus RTU
Telemecanique Safety switches XCS, Steel fixing plate for RFID Transducer XCSRK2A*
Telemecanique Safety switches XCS, Steel fixing plate for RFID Reader XCSRC**
Telemecanique Safety light curtains XUSL, Series connection jumper, 2 straight M12, Female/Female con, 3 m, 5 pins
Pre wired connectors XZ, straight female, M12, 5 pins, cable PUR 2 m
Pre wired connectors XZ, elbowed female, M12, 5 pins, cable PUR 2 m
Pre wired connectors XZ, straight female, M12, 8 pins, cable PUR 2 m
Back to top