XCC1406TR01K
Opto-electronic rotary encoders XCC, incremental encoder Ø 40, through shaft 6 mm, 100 points, push pull
End of commercialisation End of commercialization date : End of service date :
Expand all
Datasheet
Range of product
OsiSense XCC
Encoder type
Incremental encoder
Product specific application
Not applicable
Encoder name
XCC
Enclosure material
Aluminium
zamak
zamak
Cable composition
8 x 0.14 mm²
[Us] rated supply voltage
11...30 V DC
Shaft type
Through shaft
Resolution
100 points
Output stage
Type K
Type of output stage
Driver push-pull
Electrical connection
Cable radial shielded
IP degree of protection
IP52 conforming to IEC 60529
Current consumption
0...75 mA no-load
Protection type
Reverse polarity protection
short-circuit protection
short-circuit protection
Marking
CE
Shaft tolerance
H7
Residual ripple
500 mV
Vibration resistance
10 gn (f= 10-500 Hz) conforming to IEC 60068-2-6
Maximum load
1 daN axial, 2 daN radial
Shock resistance
30 gn for 11 ms conforming to IEC 60068-2-27
Output level
Low level: 1.5 V maximum 20 mA, high level: V supply - 3 V minimum 20 mA
Base material
Aluminium
zamak
zamak
Shaft material
Aluminium
stainless steel
stainless steel
Type of ball bearings
688AZZ1
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
1 CENTIMETER
Package 1 width
15 CENTIMETER
Package 1 length
12.5 CENTIMETER
Package 1 weight
800 GRAM
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Expand all
Technical Drawings
Dimensions
- (1) 2 M4 holes at 120° for cross-headed screws on 30 PCD, depth: 6 mm
- (2) Through shaft, Ø 6 (H7)
- (3) 2 M2 x 3 flat cross-headed locking screws
- (4) Ø 6 cable, length 2 m, minimum bend radius: 30 mm
Wiring Diagram
Type K Output Stage
- (1) Encoder
- (2) Processing
- (3) Supply 11 V/30 V
Wiring Diagram
Expand all
Documents & Downloads
Document name
Date
Size
11/21/2007
248246
11/21/2007
259450
11/21/2007
273934
11/21/2007
34946
11/21/2007
45286
11/21/2007
4693
11/21/2007
47846
11/21/2007
4842
11/21/2007
5090
11/21/2007
51859
11/21/2007
56744
11/21/2007
59793
11/21/2007
76722
11/21/2007
89183
11/21/2007
91677
Document name
Date
Size
2013-10-01
600848
Expand all
Related products & accessories
XCCPM23121L10
Pre wired M23 female connector, for incremental encoder, cable 10 m
XCCPM23121L2
Pre wired M23 female connector, for incremental encoder, cable 2 m
XCCPM23121L5
Pre wired M23 female connector, for incremental encoder, cable 5 m
XCCRAR1014
shaft coupling - for encoder - with spring Ø 10 to 14 mm
XCCRAR1016
shaft coupling - for encoder - with spring Ø 10 to 16 mm
XCCRAS1008
shaft coupling - for encoder - homokinetic with bellows Ø 10 to 8 mm
XCCRAS1010
Shaft coupling, for encoder, homokinetic with bellows Ø 10 to 10 mm
XCCRAS1012
Shaft coupling, for encoder, homokinetic with bellows Ø 10 to 12 mm
XCCRAS10U25
shaft coupling - for encoder - homokinetic with bellows Ø 10 mm to 0.25 inch
XCCRAS10U37
shaft coupling - for encoder - homokinetic with bellows Ø 10 mm to 0.375 inch
XCCRB1
collar for synchro mounting - for encoder Ø 58
XCCRB3
IP67 sealed collar, for encoder Ø 58
XCCRB6
fixing collar - for encoder Ø 58
XCCRE5RN
Bracket with play compensator, for encoder Ø 58
XCCRE5SN
Plain bracket, for encoder Ø 58
XCCRF4
flexible mounting kit - anti-rotation - for encoder Ø 40
XCCRF5N
flexible mounting kit - anti-rotation - for encoder Ø 58
XCCRG5
set of 3 eccentric clamps - for encoder Ø 58
XCCRX10
Shielded cable, for incremental encoder
XCCRXS8
Shielded cable with twisted pairs, for absolute SSI encoder
XZCC23FDP120S
Female, M23, 12 pin, straight connector, for encoder
Back to top
