XCC2510PS81KGN
Opto-electronic rotary encoders XCC, absolute encoder Ø 58 single turn, solid shaft 10 mm, push pull 13 bit Gray
End of commercialisation End of commercialization date : December 31st 2020 End of service date : May 11th 2021
Expand all
Datasheet
Range of product
OsiSense XCC
Device short name
XCC
Encoder type
Single turn absolute encoder
Product specific application
Not applicable
Enclosure material
Zamak
Shaft type
Solid shaft
Resolution
8192 points
Output stage
Type KG
Type of output stage
Driver push-pull gray
Electrical connection
1 male connector M23 radial 16 pins
IP degree of protection
IP65 conforming to IEC 60529, IP67 conforming to IEC 60529
[Us] rated supply voltage
11...30 V DC
Current consumption
0...100 mA no-load
Protection type
Reverse polarity protection
short-circuit protection
short-circuit protection
Marking
CE
Residual ripple
500 mV
Vibration resistance
10 gn (f= 10-2000 Hz) conforming to IEC 60068-2-6
Maximum load
10 daN radial, 5 daN axial
Shock resistance
30 gn for 11 ms conforming to IEC 60068-2-27
Output level
Low level: 0.5 V maximum 20 mA, high level: V supply - 2.5 V minimum 20 mA
Base material
Aluminium
Shaft material
Stainless steel
Type of ball bearings
6000ZZ1
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
8.5 CENTIMETER
Package 1 width
14 CENTIMETER
Package 1 length
27 CENTIMETER
Package 1 weight
465 GRAM
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Expand all
Technical Drawings
Dimensions
- (1) 3 M4 holes at 120° on 48 PCD, depth: 8 mm
- (2) 3 M3 holes at 120° on 48 PCD, depth: 8 mm
- (3) Nitrile seal
Wiring Diagram
M23, 16-pin Connector, Anticlockwise Connections
Technical Description
Type KB and KG (N) Output Stage
- (1) Output
Technical Description
KB and KG (N) DIRECTION Input
- (1) Output
- A : Anticlockwise
- B : Clockwise
- (1) DIRECTION input
- (2) DIRECTION of counting
- (3) V supply
Expand all
Documents & Downloads
Document name
Date
Size
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
7/18/2024
333
11/21/2007
115516
11/21/2007
227410
11/21/2007
2908
11/21/2007
29844
11/21/2007
300222
11/21/2007
317478
11/21/2007
3956
11/21/2007
39879
11/21/2007
40151
11/21/2007
41940
11/21/2007
51578
11/21/2007
5275
11/21/2007
56371
11/21/2007
59513
11/21/2007
59694
Document name
Date
Size
2013-08-01
2395344
Expand all
Related products & accessories
XCCR358RDL06
reduction collar - for encoder Ø 58 with hollow shaft - Ø 15 to 6 mm
XCCR358RDL08
reduction collar - for encoder Ø 58 with hollow shaft - Ø 15 to 8 mm
XCCR358RDL10
reduction collar - for encoder Ø 58 with hollow shaft - Ø 15 to 10 mm
XCCR358RDL12
reduction collar - for encoder Ø 58 with hollow shaft - Ø 15 to 12 mm
XCCR358RDLU37
reduction collar - for encoder Ø 58 with hollow shaf - Ø 15 mm to 0.375 inch
XCCR358RDLU50
reduction collar - for encoder Ø 58 with hollow shaf - Ø 15 mm to 0.5 inch
XCCRAR1008
shaft coupling - for encoder - with spring Ø 10 to 8 mm
XCCRAR1010
Shaft coupling, for encoder, with spring Ø 10 to 10 mm
XCCRAR1012
Shaft coupling, for encoder, with spring Ø 10 to 12 mm
XCCRAR1014
shaft coupling - for encoder - with spring Ø 10 to 14 mm
XCCRF5N
flexible mounting kit - anti-rotation - for encoder Ø 58
XCCRX16
Shielded cable, for absolute single turn // encoder
XZCC23FDP160S
Female, M23, 16 pin, straight connector, for encoder
Back to top
