<= 200 mA with overload and short-circuit protection
IP degree of protection
IP68 conforming to IEC 60529, IP69K
Detector flush mounting acceptance
Flush mountable
Material
Metal
Output circuit type
DC
Detection face
Frontal
Thread type
M12 x 1
Sensing range
> 2.5...4 mm
Front material
PPS
Differential travel
1...15 % of Sr
Wire insulation material
PvR
Cable composition
3 x 0.34 mm²
Status LED
Output state: 1 LED (yellow)
Switching frequency
<= 2500 Hz
Voltage drop
<2 V (closed state)
Current consumption
<= 10 mA no-load
Delay first up
10 MILLISECOND
Delay response
0.2 MILLISECOND
Marking
II2 D-Ex tb IIIC T90°C Db IP68
Delay recovery
0.2 MILLISECOND
Product certifications
IEC-Ex INE 17.0006 INERIS 04ATEX0022
Environmental characteristic
Hazardous location
Standards
IEC 60079-0 IEC 60079-31
Directives
2014/34/EU - ATEX directive
Vibration resistance
25 gn amplitude = +/- 2 mm (f = 10-55 Hz) conforming to IEC 60068-2-6
Shock resistance
50 gn for 11 ms conforming to IEC 60068-2-27
Dust zone
Zone 21 - 22
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
13 CENTIMETER
Package 1 width
4 CENTIMETER
Package 1 length
9.5 CENTIMETER
Package 1 weight
126 GRAM
Indivisible sale quantity
1
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov