XS530BSDAM12
Inductive proximity sensors XS, inductive sensor XS5 M30, L55mm, brass, Sn10mm, 12...24 VDC, M12
Discontinued End of commercialization date : 31 May 2023 End of service date : 31 May 2023
Expand all
Datasheet
Range of product
Telemecanique Inductive proximity sensors XS
Series name
General purpose
Sensor type
Inductive proximity sensor
Device application
-
Sensor name
XS5
Sensor design
Cylindrical M30
Size
55 mm
Body type
Fixed
Detector flush mounting acceptance
Flush mountable
Material
Metal
Type of output signal
Discrete
Wiring technique
2-wire
[Sn] nominal sensing distance
10 mm
Discrete output function
1 NO
Output circuit type
DC
Electrical connection
Male connector M12, 4 pins
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Switching capacity in mA
1.5...100 mA DC with overload and short-circuit protection
IP degree of protection
IP67 conforming to IEC 60529
IP69K conforming to DIN 40050
IP69K conforming to DIN 40050
Thread type
M30 x 1.5
Detection face
Frontal
Front material
PPS
Enclosure material
Nickel plated brass
Operating zone
0…8 mm
Differential travel
1...15% of Sr
Status LED
Output state: 1 LED (yellow)
Supply voltage limits
10…36 V DC
Maximum residual current
0.5 mA open state
Switching frequency
<= 2000 Hz
Maximum voltage drop
<4 V (closed)
Maximum delay first up
10 ms
Maximum delay response
0.3 ms
Maximum delay recovery
0.3 ms
Marking
CE
Threaded length
32 mm
Length
55 mm
Net weight
0.13 kg
Product certifications
UL
CSA
CSA
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…85 °C
Vibration resistance
25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6
Shock resistance
50 gn for 11 ms conforming to IEC 60068-2-27
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
6.4 cm
Package 1 Width
4.1 cm
Package 1 Length
9.4 cm
Package 1 Weight
116 g
Unit Type of Package 2
S02
Number of Units in Package 2
44
Package 2 Height
15 cm
Package 2 Width
30 cm
Package 2 Length
40 cm
Package 2 Weight
5.419 kg
Sustainable offer status
Green Premium product
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Circularity Profile
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Technical Drawings
Dimensions
(1) : LED
Minimum Mounting Distances
Side by side
e (1) ≥ 20 mm/0.79 in
Face to face
e (2) ≥ 120 mm/4.72 in
Facing a metal object
e (3) ≥ 30 mm/1.18 in.
Wiring Schemes
2-Wire Non-polarised
2-Wire Non-polarised
M12 connector
NO output
Performance Curves
Standard Steel Target : 30x30x1 mm
(1) Pick-up points
(2) Drop-out points (object approaching from the side)
(y) Sensing distance in mm
Expand all
Documents & Downloads
Document name
Date
Size
11/23/2023
2.0 MB
Document name
Date
Size
11/29/2023
18.7 MB
2/10/2024
19.1 MB
Document name
Date
Size
8/22/2024
195.3 kB
Document name
Date
Size
4/24/2024
18.7 MB
Expand all
Related products & accessoires
XSZB130
Inductive proximity sensors XS, accessory for sensor, Ø 30 mm, fixing clamp with indexing, plastic
XSZBS30
Inductive proximity sensors XS, accessory for sensor, fixing bracket, for Ø 30 mm sensor
XZCP1141L5
Pre wired connectors XZ, straight female, M12, 4 pins, cable PUR 5 m
XZCP1241L5
Pre wired connectors XZ, elbowed female, M12, 4 pins, cable PUR 5 m
Back to top
