XS9D111A1L2
Inductive proximity sensors XS, inductive sensor XS9 80x80x26, PBT, Sn40mm, 24 VDC, cable 2 m
Discontinued End of commercialization date : 31 May 2023 End of service date : 31 May 2023
Expand all
Datasheet
Range of product
Telemecanique Inductive proximity sensors XS
Series name
Application
Sensor type
Inductive proximity sensor
Device application
-
Sensor name
XS9
Sensor design
Flat form 80 x 80 x 26
Size
26 mm
Body type
Fixed
Detector flush mounting acceptance
Flush mountable
Material
Plastic
Enclosure material
PBT
Type of output signal
Analogue
Wiring technique
3-wire
[Sn] nominal sensing distance
40 mm
Output circuit type
DC
Analogue output range
0...10 V
Electrical connection
Cable
Cable length
2 m
[Us] rated supply voltage
24 V DC
IP degree of protection
IP68 double insulation conforming to IEC 60529
Detection face
Frontal
Front material
PBT
Operating zone
5…40 mm
Repeat accuracy
<= 3% of Sr
Linearity error
+/- 1 V
Cable composition
3 x 0.34 mm²
Wire insulation material
PVC
Status LED
Without
Supply voltage limits
15…36 V DC
Switching frequency
<= 100 Hz
Current consumption
0...4 mA no-load
Maximum output current drift
10 %
Marking
CE
Depth
26 mm
Height
80 mm
Width
80 mm
Product certifications
UL
Ecolab
CSA
Ecolab
CSA
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…85 °C
Vibration resistance
25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6
Shock resistance
50 gn for 11 ms conforming to IEC 60068-2-27
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
13.2 cm
Package 1 Width
6.6 cm
Package 1 Length
9.5 cm
Package 1 Weight
419.0 g
Unit Type of Package 2
S01
Number of Units in Package 2
7
Package 2 Height
15.0 cm
Package 2 Width
15.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
3.158 kg
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Technical Drawings
Dimensions
(1) For CHC type screws
Setting-up
Minimum Mounting Distances (mm)
Minimum Mounting Distances (mm)
Minimum Mounting Distances (mm)
Side by Side
e (1) ≥ 120
Face to Face
e (2) ≥ 300
Facing a Metal Object
e (3) ≥ 120
Wiring Schemes
3-Wire Connection
| Output current | Load impedance value | Output voltage | Load impedance value | |
|---|---|---|---|---|
| 24 V | 0...10 mA | R ≤ 1400 Ω | 0...10 V | R = 1000 Ω |
BU : Blue
BN : Brown
BK : Black
(1) Voltage output
Ensure a minimum of 5 V between the + (terminal 1) and the sensor output (terminal 4)
Output Curves
(Y) Us (V)
(X) Sensors - object distance (mm)
Expand all
Documents & Downloads
Document name
Date
Size
Document name
Date
Size
5/3/2024
24.3 MB
Document name
Date
Size
1/31/2024
195.3 kB
1/31/2024
195.3 kB
Back to top
