Datasheet
Technical Drawings
Connector Wiring
Pin number | Wire color | Description |
---|---|---|
1 | BN: Brown | +14…24VDC |
2 | WH: White | Input teach |
3 | BU: Blue | 0 VDC |
4 | BK: Black | Output |
5 | GY: Grey | Synchronization |
Wiring Scheme
Wiring for the Synchronization Function (Side by Side Application)
NB: To enable synchronization between several sensors, all of the wires of pin no.5 (Grey) must be electrically connected together.A maximum of 8 sensors can be synchronized. To enable “Multiplexer” function for the sensors, use the XX Configuration Software.Without synchronization or multiplexing, the sensors must be at least 50 cm away from each other in order to avoid mutual interference.
Detection Curve with 100 x 100 mm / 3.94 x 3.94 in. Square Target
Detection Curve with Round Bar
Near and Far Limits Setting with Teach Procedure
Documents & Downloads
11/23/2023
17.9 MB
11/23/2023
18.1 MB
11/23/2023
17.9 MB
11/23/2023
18.0 MB
11/22/2023
195.3 kB
11/22/2023
195.3 kB
11/22/2023
1.6 MB
Related products & accessoires
Inductive proximity sensors XS, accessory for sensor, Ø 18 mm, fixing clamp, plastic, with indexing
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, M12 rod
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, support for M12 rod
90° fixing bracket, Photoelectric sensors XU, accessory for sensor, Ø 18 mm, stainless steel
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, bracket with ball joint, Ø 18 mm
Low temperature operation accessory, Mounting for OsiSense XX M18
Female, M12, 4 pin, elbowed connector, cable gland Pg 7
Female, M12, 4 pin, elbowed connector, cable gland Pg 7
Female, M12, 4 pin, straight connector, cable gland Pg 7
Female, M12, 4 pin, straight connector, cable gland Pg 7
Pre wired connectors XZ, straight female, M12, 4 pins, cable PUR 2 m
Pre wired connectors XZ, elbowed female, M12, 4 pins, cable PUR 2 m
Ultrasonic sensor configuration interface
Ultrasonic sensor configuration kit
Back to top